Investigation on the anti-reduction mechanism of Ti4+ in high dielectric constant system Ca0.9La0.067TiO3 by doping with Al2O3

Ca_0.9La_0.067TiO₃ (abbreviated as CLT) ceramics doped with different amount of Al₂O₃ were prepared via the solid state reaction method. The anti-reduction mechanism of Ti⁴⁺ in CLT ceramics was carefully investigated. X-ray diffraction (XRD) was used to analyze the phase composition and lattice structure. Meanwhile, the Rietveld method was taken to calculate the lattice parameters. X-ray photoelectron spectroscopy (XPS) was employed to study the valence variation of Ti ions in CLT ceramics without and with Al₂O₃. The results showed that Al³⁺ substituted for Ti⁴⁺ to form solid solution and the solid solubility limit of Al³⁺ is near 1.11 mol%. Furthermore, the reduction of Ti⁴⁺ in CLT ceramics was restrained by acceptor doping process and the Q × f values of CLT ceramics were improved significantly. The CLT ceramic doped with 1.11 mol% Al₂O₃ exhibited good microwave dielectric properties: ε_r = 141, Q × f = 6848 GHz, τ_f = 576 ppm/°C.     

PEG修饰的镍钴层状双氢氧化物微球抗菌及溶血性能研究

双氧水作为常用的活性氧试剂广泛应用于清洗创面、去除痂皮、清洗带恶臭的创伤。但是由于其具有强烈刺激性,常采用表面涂抹的方式应用,不可注入体内。并且其常用的浓度高于生理水平,会对健康组织有一定毒性,甚至会延迟伤口愈合。为了解决这个问题,设计了一种利用聚乙二醇修饰的生物相容性好的镍钴层状双氢氧化物微球PEG-Ni/Co-LDHs,使得其具有较高的抑菌效果,同时能减少双氧水的用量。采用一步沉淀法合成了PEG-Ni/Co-LDHs,使用SEM、TEM、XRD等方法对PEG-Ni/Co-LDHs的结构进行表征,结果显示该材料的分散性能好,粒径约为470 nm,微球呈花状结构,由薄层似花瓣结构层层组装而成。PEG-Ni/Co-LDHs具有过氧化物酶的活性,这使得在双氧水的作用下能有效产生羟基自由基,高效抑制革兰氏阴性菌(大肠杆菌)和革兰氏阳性菌(金黄色葡萄球菌)增殖,高浓度时与双氧水联合作用,细菌成活率分别为32%和19%。采集大鼠血细胞对纳米材料PEG-Ni/Co-LDHs进行溶血性能研究,发现在高浓度时,其溶血率低于12%,未出现明显的溶血作用,具有很好的生物相容性。研究结果表明,PEG-Ni/Co-LDHs具有高抗菌活性和低溶血毒性的特点,为其今后作为抗菌剂在生物体内应用奠定了研究基础。     

Hybrid sonochemic urea-nitrate combustion preparation of CuO/ZnO/Al2O3 nanocatalyst used in fuel cell-grade hydrogen production from methanol: Effect of sonication and fuel/nitrate ratio

Fuel cell-grade hydrogen production has been studied via steam reforming of methanol (SRM) over a series of CuO/ZnO/Al₂O₃ nanocatalysts fabricated by the combustion method. The effect of sonication and urea/nitrate ratio on the characteristics and catalytic properties of the prepared catalysts has been investigated. The synthesized catalysts were characterized by x-ray diffraction (XRD), field emission scanning electron microscope (FESEM), Particle Size Distribution (PSD), energy dispersive x-ray (EDX), Brunauer-Emmett-Teller (BET) and FTIR analyses XRD patterns showed positive influence of urea/nitrate ratio on CuO and ZnO crystallite sizes. The ultrasonic mixing of primary gel compared with conventional mixing led to lower crystallite size. FESEM images showed that the sample mixed by sonication with a urea/nitrate ratio of 1 had more homogeneous morphology with narrow particle size distribution. EDX results proved the presence of all metals on the surface of the nanocatalysts and better consistence between the gel and surface composition of elements in samples prepared by sonication. Catalytic performance showed that sonication during the mixing of primary gel dramatically increased the methanol conversion. It was also proved that increasing the amount of urea led to lower catalytic activity. The ultrasound-treated nanocatalyst with urea/nitrate?=?1 was the best sample in terms of activity and selectivity. It was stable in the SRM for 1200?min without considerable change in methanol conversion and product selectivity.     

The thermodynamic characteristics of a Stirling/pulse tube hybrid cryocooler

A Stirling/pulse tube hybrid cryocooler (SPC), comprised of a Stirling cryocooler as the first stage and a pulse tube cryocooler as the second stage, features the ability of shifting cooling capacity between stages by adjusting the movement of the displacer in the first stage. Such an ability allows an SPC to accommodate itself to time-varying heat loads at different temperatures, which makes it a competitive candidate in space applications. However, due to the gas coupling, there exists a significant mutual effect between stages which endows an SPC with special thermodynamic characteristics and has a significant effect on the SPC’s capability of shifting cooling capacity between stages. With the phasor analysis and the thermodynamic analysis, this paper establishes an idealized model of an SPC. The model is then used to study the effect of the second stage on the first stage and reveal the condition that an SPC is able to shift cooling capacity between stages. Also, the model is compared with a Sage numerical model and the two models are consistent on the overall trend. Though it is unable to reflect reality precisely, the idealized model can interpret the mechanism and highlight some of the essential nature of an SPC, which will eventually benefit the appropriate design of an SPC.     

An Artificial Skyrmion Platform with Robust Tunability in Synthetic Antiferromagnetic Multilayers

Magnetic skyrmions are topologically nontrivial spin structures, and their existence in ferromagnetically coupled multilayers has been widely reported with a disordered arrangement. Here, a nucleation scenario of ordered skyrmions in nanostructured synthetic antiferromagnetic (SAF) multilayers is proposed and experimentally demonstrated using direct magnetization imaging, indirect magnetometer and magnetoresistance measurement, and micromagnetic simulation. Instead of relying on Dzyaloshinskii–Moriya interaction, the antiferromagnetic interlayer exchange coupling in the SAF multilayers fulfills the role of nucleation and stabilization of skyrmions. The robustness of the proposed skyrmion nucleation scenario is examined against temperature from 4.5 to 300 K and device size from 400 to 1200 nm. Interestingly, these synthetic skyrmions still behave well with a size less than 100 nm. The higher stability than generic magnetic domains can be attributed to topological protection. The results thus provide an artificial skyrmion platform to meet the functional needs of high density and designable arrangement in magnonic and spintronic applications.     

伞帽用高铬铸铁在热强碱腐蚀环境下的磨损分析

针对氧化铝行业中常用的Cr28和Cr20高铬铸铁伞帽在相同工况条件下的磨损机理进行分析,并对比研究了实际生产中两种失效材料的成分、组织及性能。结果表明,伞帽部件在高温强碱腐蚀条件下受到外界冲刷时,磨损量由微切削磨损与变形磨损这两种机制共同决定。含铬量较高的Cr28高铬铸铁,其冲刷和抗腐蚀磨损性能均优于Cr20高铬铸铁。伞帽服役寿命主要受浆料和表层的铸铁材料两大因素影响。两种试验材料经淬火+回火处理后,基体组织中主要为回火马氏体+M₇C₃型碳化物+少量残留奥氏体,其中含铬量较高的Cr28高铬铸铁中共晶碳化物含量更高,且分布更加弥散,其平均硬度值为64.0 HRC,高于Cr20高铬铸铁的60.2 HRC。最终确定Cr28高铬铸铁作为伞帽材质更能满足氧化铝生产及设备检修周期的需要。     

B对FeCoCrNiSiBx高熵合金激光熔覆层组织和硬度的影响

采用激光熔覆制备了FeCoCrNiSiB_x高熵合金熔覆层,利用光学显微镜、扫描电镜、X射线衍射仪和显微硬度计研究微量硼元素(摩尔比x=0、0.02、0.04、0.06、0.08)对FeCoCrNiSiB_x高熵合金熔覆层组织和硬度的影响。结果表明:无B高熵合金涂层组织主要为胞状晶。B的添加会促进枝晶的生成,逐渐形成鱼骨状树枝晶,但过量的B会破坏枝晶完整性,形成蠕虫状晶。此外,高熵合金熔覆层组织为FCC和BCC双相结构,B元素的添加会形成大量0.1~2.6 μm的Cr₂B第二相,有助于提高熔覆层硬度,其中x=0.06时激光熔覆层的硬度最高,约为537 HV0.2。     

药用辅料对CYP3A活性的影响及其对仿制药质量和疗效一致性评价的指导作用

药物制剂的处方和工艺是保证药物质量和疗效的基础，药用辅料是药物制剂处方的重要组成部分。部分药用辅料可影响CYP3A的活性，继而可能影响其底物在体内的代谢和生物利用度。在中国和美国，相对生物利用度是仿制药研究的关键内容。我国正在推进仿制药质量和疗效一致性评价。因此，了解药用辅料对CYP3A的影响及其对一致性评价的指导作用具有十分重要的现实意义。     

Shape optimization of bi-directional flow passage components based on a genetic algorithm and computational fluid dynamics

The inlet/outlet is an important part of a water conveyance system in a pumped storage power station (PSPS). Its hydraulic characteristics are directly related to the operation and economic benefit of the PSPS. Frequent changes between inflow and outflow operations pose significant challenges in the design of the inlet/outlet diffusion segment shape. In this study, an effective optimization method, including three-dimensional parametric modelling, computational fluid dynamics and a genetic algorithm, is introduced and coupled to the design of the diffusion segment shape. The hydraulic characteristics of bi-directional flow, including the head loss, velocity uneven distribution and uneven discharge distribution, are selected as the objective function in the optimization method. Using this method, the recommended shape of the inlet/outlet is studied and its hydraulic characteristics are discussed. The results indicate that the optimized inlet/outlet has better performance.